Pioneer CT-3
¥ 49,800 (around 1975)
Commentary
A stereo cassette deck with high cost performance by inheriting the mechanism of CT-7 and CT-5.
In order to guarantee low rotational unevenness, we have adopted a DC motor with large torque that is not affected by voltage fluctuations, and a high-precision capstan with roundness of 0.1 μ or less.
The built-in Dolby system greatly reduces the tape hissing. The built-in MPX filter circuit allows the Dolby circuit to operate stably even on FM recording tapes.
In addition, the Dolby operation indicator lamp is mounted.
It is equipped with a tape selector. When a general low-noise tape is used, both bias and equalizer are set to STD position. When a chrome tape is used, CrO is set to STD position.2Position.
When using ferri chrome tape, bias is STD and equalizer is CrO.2For more information.
The head uses a solid permalloy head that uses a hard permalloy core.
Equipped with a full auto-stop mechanism that does not burden the tape or mechanism by combining a contactless detection mechanism of the tape stop and a solenoid.
It uses a direct change operation button that can move directly to play from FF/REW without going through stop.
Equipped with a level meter.
Model Rating
Type | Stereo cassette deck | ||
Recording system | AC bias 85 kHz | ||
Erasing method | AC push-pull system | ||
Heads | Reread : Permalloy solid head x1 Erase : 1 ferrite head |
||
Motor | One electronically controlled DC motor | ||
Quick winding speed | About 80 seconds (at C-60) | ||
Uneven Rotation (WRMS) | Not more than 0.12% | ||
Frequency characteristic | General, LH Tape : 30 Hz ~ 13 kHz, 40 Hz ~ 11 kHz ± 3 dB Chrome Tape : 30 Hz ~ 16 kHz, 40 Hz ~ 12 kHz ± 3 dB |
||
S/N |
|
||
Input Sensitivity / Maximum Allowable Input / Impedance |
Microphone : 0.3mV/63MV/20k Ω (Compatible Impedance 600 Ω ~ 20k Ω) Line : 63mV/12V/50k Ω DIN : 100mV/2V/10k Ω |
||
Reference output level / Impedance |
Line : 450mV/50k Ω Headphone : 80mV/8 Ω |
||
Semiconductor used | Transistor : 41 (For Motor Electronic Control : 2) FET : 2 Diode : 25 Pieces (For Motor Electronic Control : 1 Piece) Zener diode : 3 pcs Light emitting diode : 1 |
||
Pwer | 100 VAC, 50Hz/60Hz | ||
Power consumption | 13W max. | ||
External dimensions | Width 350x Height 142x Depth 282 mm | ||
Weight | 6.5kg | ||
Attachment | 2 stereo connection code Head Cleaning Kit x1 Set |