Exclusive EA-10

Commentary

Twin pipe tone arm of the arm exchange system adopted in Exclusive P10.

A variable level oil dump mechanism using highly reliable silicon oil has been adopted to improve traceability and greatly reduce cross-modulation distortion that occurs during large amplitude reproduction in the low frequency range.
In addition, by rotating the adjustment ring, the damping is off, and the horizontal balance can be accurately taken.

It uses a straight tapered pipe made of carbon fiber with a head shell that flattens the mechanical impedance of the tone arm.
It is also equipped with an S-shaped universal arm pipe to enable the use of commercially available head shells.

There was a straight pipe arm sold separately.

Model Rating

Type	Tone arm
Format	Dynamic Balance Type, Pipe Replacement Type Straight Pipe And S-shaped pipe included
Effective arm length	282mm
Overhang	12.5mm
Tracking error angle	+ 1.85 ° ~ -1.10 °
Needle pressure adjustment range	0 ~ 3g (0.1g step)
Applicable Cartridge Dead Weight	4g ~ 35g (Excluding Head Shell)
Height adjustment range	46.5 mm ~ 80 mm
Output code	Low-impedance oxygen-free copper wire with gold-plated plug
Base mounting part	Collet chuck system
Braking part	Low-range braking mechanism using silicon oil (variable damping factor system)
Attachment mechanism	Direct lever type anti-skating Silicone Oil Dump Type Arm Lifter
Weight	2.5kg
Sold Separately	Straight Pipe Arm EP-01 (¥ 18,000)