|Paragon Acoustics NewRegent
( It is 1 set in two sets, around the 1996 time)
The Tallboy type speaker system using the speaker
unit of DYNAUDIO.
Two 17W75 which are a 17cm cone type Woofer of
DYNAUDIO are carried in low-pass.
The organic compound cone which mixed the
metal oxide is adopted as the diaphragm of this unit. Moreover, the diameter of
a voice coil has adopted the large-sized thing also as those with 75mm, and a
Furthermore, in order that the backplane of a Woofer unit may
control an oscillation of a frame, the dumping is given with sound putty.
D-21/2 which is a 2cm dome shape tweeter of DYNAUDIO are carried in the
The sorting article is used for all the units. Especially
two Woofers that carry out a parallel drive are selecting carefully and using
what has a very near physical characteristic.
Moreover, the tone-quality
modification is aimed at by adopting a vertical twin design.
of the network product line is directly carried out with the Tinning, and it has
eliminated the printed circuit board. Moreover, in order to avoid the ill effect
by a transition of the normal atmosphere inside a speaker system, or cabinet
oscillation, all LC parts are sealed by the polymer resin.
The cable made
from the Caldas audio is adopted as product-line material.
In order to put into practice and eliminate an unnecessary colorlation,
the Resonance absorbration system is adopted as an enclosure. By this scheme,
the sound in which a reverberation peculiar to wood remains by stretching
the sound putty used also for the speaker unit inside the enclosure, and
also stretching the lead plate of 4mm thickness from on that is dumped.
Moreover, the high-density particle board is adopted as an enclosure.
Bi-wiring is supported.
The spike is attached.
||2 ways, 3 speaker bass-reflex scheme, and a
||For low-pass: 17cm cone type (17W75) x2
For high regions: 2cm dome shape (D-21/2)
||25Hz - 24kHz
|Output sound pressure level
|The maximum input
||Width 257x height 1,227x depth of 405mm