ONKYO HTP-L3
¥ 65,000 (1 set, sold on November 28, 2001)
Commentary
This digital home theater system is a set of 5 satellite speakers D-L1, 6 ch amplifier built-in subwoofer SWA-L1 and AV surround center ED-L1.
The AV Surround Center ED-L1 is equipped with three types of decoders : Dolby Digital, DTS, and Dolby Pro Logic.
It is equipped with a 24 bit DSP chip made by Crystal and a 96kHz/24bit D/A converter.
The D-L1 uses an 8 cm full-range speaker with an OMF diaphragm and an S-line edge that reduces the reflection of propagating waves at the diaphragm and edge junction.
The enclosure is made of MDF material with 60-mm-pitch screw holes for brackets at the bottom and wall mounting holes at the back.
The SWA-L1 is a subwoofer with a built-in power amplifier that drives the D-L1.
The enclosure uses the J' DRIVE system and the unit is equipped with a 20 cm cone woofer.
A dedicated 6-channel audio RCA pin cable is included for easy connection.
Wireless remote control is included.
.JPG)
Model Rating
| Type | Digital home theater system |
| <Specifications of AV Surround Center ED-L1> | |
| Input Sensitivity / Impedance | Line : 200mV/50k Ω |
| Output Level / Impedance | 2V/800 Ω (at stereo and volume max) |
| Frequency characteristic | 150 Hz ~ 20 kHz + 1-3 dB at L/R/C/SL/SR, stereo 20 Hz ~ 150 Hz + 1-3 dB (at SW, stereo) |
| Voice input | Digital terminal : 2 systems (optical 2) Analog terminal : 2 lines (Line1/2) |
| Audio output | Analog connector : Route 6 (Front L/R, Center, Surround L/R, Subwoofer) Headphone port : 1 system |
| Power consumption | 16W (Electrical Appliances and Materials Safety Law) |
| External dimensions | Width 205x Height 70x Depth 235 mm |
| Weight | 2.4kg |
| Specifications of Satellite Speaker D-L1 | |
| Method | 1-Way, 1-Speaker, Sealed System, Bookshelf Type, Anti-Magnetic Design (EIAJ) |
| Units Used | All-band : 8 cm cone speaker |
| Rated impedance | 6 Ω |
| Max Input | 30W |
| Output sound pressure level | 83dB/W/m |
| Frequency characteristic | 125 Hz to 25 kHz |
| Cabinet internal volume | 0.6L |
| External dimensions | 85 mm wide x 120 mm high x 112 mm deep |
| Weight | 0.7kg |
| Specifications of Subwoofer SWA-L1 | |
| Method | Built-in 6-ch Amplifier / 1-way / 1-speaker / J' DRIVE System / Floor Type / Anti-magnetic Design (EIAJ) |
| Units Used | For Ultra Low Band : 20 cm Cone Type |
| Input Sensitivity / Impedance | 500mV/50k Ω (L/R/C/SL/SR/SW) |
| Maximum practical power | 30Wx5ch (Front L/R, Center, Surround L/R, 1 khz, 6 Ω, EIAJ) 50W (Subwoofer, 100 Hz, 12 Ω, EIAJ) |
| Subwoofer frequency characteristics | 30 Hz to 150 Hz |
| Cabinet internal volume | 13.6L |
| Total harmonic distortion factor | 0.1% (at 5W output) |
| S/N ratio (IHF-A) | 100dB(stereo) |
| Voice input | Analog connector : Route 6 (Front L/R, Center, Surround L/R, Subwoofer) |
| Power consumption | 107W (Electrical Appliances and Materials Safety Act) |
| External dimensions | Width 251x Height 316x Depth 408 mm |
| Weight | 14.1kg |
| <General> | |
| Attachment | Remote control Optical cable (1m) 6-ch audio RCA pin cable (3m) Speaker cable (2.5mx3, 8mx2) Spacer x4 for ED-L1 Cork / Insulator for D-L1 x20 Speaker mounting bracket for D-L1 x5 Cork / Insulator x4 for SWA-L1 |