Audio Database

D-202AXLTD
Commentary

This is a limited model speaker system based on the D-202AX and improved.

A 16 cm cone type woofer is installed in the low range.
The diaphragm uses a silk OMF (ONKYO Micor Fiber) diaphragm. This diaphragm uses natural silk material with high internal loss to minimize noise components generated from the diaphragm. It also improves the transient by balancing the mass and rigidity of the diaphragm.

A 2.5 cm soft dome type tweeter is installed in the high range.
A pure silk diaphragm is used for the diaphragm, and an oxygen-free voice coil is used for the voice coil.

High-quality parts such as condensers made by German company WIMA are used in the network section to improve sound quality.
The woofer unit uses a direct wiring method that directly inputs the music signal from the amplifier.

The enclosure has a bass reflex design and uses MDF as the material.
In addition, the exterior has a real wood veneer paint finish.
In addition, the D-202AXLTD uses a modular structure for its internal structure, giving it a beautiful afterglow sound. In addition, the front baffle is 30 mm thicker than the D-202AX for increased rigidity.

The speaker terminal uses a gold-plated brass scraping terminal that supports banana plugs.

The speaker cable XP made by Monster is included as an accessory.

There was a speaker stand exclusively for D-202AX/D-202AXLTD sold separately.

Model Rating
Method 2-way, 2-speaker, Basref System, Bookshelf Type, Anti-magnetic Design (EIAJ)
Units Used For low band : 16 cm cone type
For high-pass : 2.5 cm dome type
Playback frequency band 30 Hz to 35 kHz
Max Input 80W
Impedance 6 Ω
Output sound pressure level 89dB/W/m
Crossover frequency 3kHz
Cabinet internal volume 14.5L
External dimensions 205 mm W x 333 mm H x 352 mm D (Including RUNNET)
Weight 7.9kg
Attachment Speaker Cable Monster Cable XPHP (2.5mx2)
Speaker Stand AS stand AS 200 a (2 pcs 1 set, ¥ 22,000)
External dimensions Width 295x Height 479x Depth 295 mm
Top Plate : Width 184x Depth 210 mm
Weight 4.0kg