ONKYO TA-600

Commentary

This is a stereo cassette deck equipped with various functions while enhancing basic performance.

With upright loading, you can check the remaining running amount of the tape and track label at a glance.
In addition, the detachable door improves maintenance, such as cleaning of the head.

A hard WIDEX head has been adopted for the head, and it has acquired about 10 times more abrasion resistance than conventional permalloy.
This head is a full-face shield type to minimize the influence of external magnetic field.

The drive section uses a DC servo motor that automatically controls the rotational speed using an electronic circuit.

Equipped with a timer standby mechanism, recording of absence and alarm clock playback are possible by combining with a separately sold timer.

Equipped with a tape selector that can switch bias and equalizer independently, it is compatible with various types of tapes.

Equipped with a full auto-stop mechanism, the mechanism automatically stops when the tape ends even during recording, playback, rewind, or fast-forward operation, so there is no excessive burden on the mechanism or tape.

Model Rating

Type	Stereo cassette deck
Track format	4-track 2-channel stereo
Tape speed	4.8cm/s
Quick winding time	90 seconds (C-60 tape)
Wow and flutter	0.1%(W.R.M.S.)
Frequency characteristic	30 Hz ~ 14 kHz (Low Noise Tape) 30 Hz ~ 16 kHz (CrO2 Tape)
Distortion factor	2.0% (1 kHz, 0 dB)
S/N	52dB
Minimum input level	Microphone : 0.3mV/600 Ω (200 Ω ~ 10k Ω Compatible) Line : 50 mV
Reference Output / Impedance	Line : 0.480 V (0 VU) / 50k Ω or more Headphone : 8 or 200 Ω
Re-Connector (DIN)	Reference output : 0.480 V (0 VU) Minimum input level : 0.15mV/k Ω
Motor	DC servo motor
Heads	Hard Permalloy WIDEX Head
Semiconductor used	Transistor : 12 IC : 4 Diode : 14 pcs SCR : 1 LED : 1
Pwer	100 VAC, 50Hz/60Hz
Power consumption	9.2W
External dimensions	Width 418x Height 158x Depth 294 mm
Weight	5.8kg
Attachment	Connection code Cleaning rod