Audio Database

Image of the Integra MA-1000X
Commentary

This is a pre-main amplifier that condenses the basic design of the Integra A-817RXII into a compact size of 330 mm wide.

An in-phase transformer is added to the signal system and power supply circuit. This in-phase transformer cuts off the loop with the connected equipment to prevent external interference to the amplifier.

The output is equivalent to that of the A-815RXII.

It is equipped with a direct tone with a Contrabass with a booth in the ultra low range.

Model Rating
Type Stereo pre-main amplifier
Rated output (20 Hz to 20 kHz
Aux → sp out, both channels driven)
90W + 90W (6 Ω)
80W + 80W (8 Ω)
Total harmonic distortion rate (20 Hz to 20 kHz) Aux → sp out : 0.006% (8 Ω at rated output)
Phono MM → rec out : 0.004% (3 V)
Phono MC → rec out : 0.02% (3 v)
Intermodulation distortion factor (20 Hz to 20 kHz) Aux → sp out : 0.004% (at rated output)
Powerbandwidth 5 Hz to 100 kHz (IHF-3dB, THD 0.2%, 8 Ω)
Damping factor 100 (1 kHz, 8 Ω)
Frequency characteristic Phono → rec out (RIAA deviation) : 20 Hz to 20 kHz ± 0.2 dB
Aux → sp out : 2 Hz to 100 kHz + 0 -3dB
Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Phono MC : 180 μ V/220 Ω
CD, tuner, aux, tape play : 150mV/47k Ω
Video Input : 1Vp-p/75 Ω
Phono maximum allowable input
(1kHz/10kHz, 0.05%)
phono MM:210mV/950mV
phono MC:15mV/75mV
Rated output voltage / impedance Tape rec1, 2 : 150mV/560 Ω
VCRrec (voice) : 150mV/560 Ω
Video output : 1Vp-p/75 Ω
S/N ratio (IHF-A filter input short) phono MM:86dB
phono MC:70dB
CD, tuner, aux, tape play : 100 dB
VCR play:100dB
Tone Control (Vol-16dB) Bass : + / - 10 dB
Treble : + / - 8 dB
Loudness +7dB(100Hz)
Muting -20dB
Pwer 100 VAC, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law standard) 150W
AC outlet Unswitched : 1 line, 200W
Switched : 2 systems, total 200W
External dimensions Width 330x Height 108x Depth 357 mm
Weight 8.1kg