ONKYO Integra 714
¥ 48,800 (around 1969)
Commentary
Pre-main amplifier equipped with preset tone control of 3-circuit switching.
The circuit configuration is almost the same as that of Integra 713.
In addition to a multi-step-up system that allows for multi-function, top panel and new chuck type speaker terminals are adopted.
Model Rating
Type | Pre-main amplifier |
Power Amplifier Unit | |
Rated output (at THD 0.1%) | 35W+35W |
Dynamic Power | 90W |
Distortion Factor (1 kHz, Rated Output) | Not more than 0.1% |
Frequency characteristic | 10 Hz to 60 kHz, 0 -1dB |
Power Band With (IHF) | 15 Hz ~ 40 kHz |
Damping factor | 100 |
Signal-to-noise ratio (IHF A network) | 100 dB or more |
Rated input voltage / impedance | 1V/100k Ω |
Load impedance | 4 Ω ~ 16 Ω |
Preamplifier Section | |
Distortion Factor (1 kHz, 1 V Output) | Not more than 0.1% |
RIAA deviation (20 Hz to 15 kHz) | Within ± 0.5 dB |
Equalizer Allowable Input (1 kHz) | 160mV |
Signal-to-noise ratio (IHF-A) | Phono1, 2 : 70 dB or more AUX, Tuner : 80 dB or more |
Input Sensitivity / Impedance (1 kHz) | Phono1, 2 : 2.5mV/50k Ω, 100k Ω switching AUX : 180mV/100k Ω Variable Tuner, Tape moni : 180mV/100k Ω |
Tone control | Bass : ± 12 dB, 3 channels Treble : ± 12 dB, 3 channels |
<General> | |
External dimensions | Width 437x Height 136x Depth 345 mm |
Weight | 10.5kg |