Audio Database

FR-435
Commentary

CD/MD tuner amplifier that integrates CD, MD, tuner and amplifier.

A 4 Ω discrete amplifier is used for the power amplifier.

The power supply is composed of digital and analog double transformers.

The digital signal processing section of the MD is equipped with a 20-bit processing circuit.

Operability is improved by the Multijog dial.

Equipped with CD → MD one touch dubbing function.

Equipped with signal sync recording function.

It is equipped with a sampling rate converter and an optical digital input / output terminal.

Power cable with polarity display is used.

The speaker terminal connector is used for the speaker terminal.

Model Rating
Type CD/MD tuner amplifier
Amplifier Unit
Rated output 43W + 43W (4 Ω)
31W + 31W (8 Ω)
Maximum practical power 50W + 50W (EIAJ, 4 ω)
Total harmonic distortion factor 0.2% (8 Ω at rated output, 1 kHz)
Signal-to-noise ratio 100 dB (Tape, Line1, 2)
Input Sensitivity / Impedance Line1, 2, Tape : 200mV/50k Ω
Tuner Section
Receiving frequency FM : 76.00 MHz to 108.00 MHz
AM : 522 kHz to 1629 kHz
Sensitivity FM : 18.8 dBf (2.4 μ V, 75 Ω, S/N50dB)
Distortion Factor (FM) mono:0.5%
stereo:0.8%
SN ratio (FM) mono:73dB
stereo:67dB
<CD Player Part>
Frequency characteristic 5 Hz to 20 kHz ± 1.5 dB
Wow and flutter Below the measurement limit
<MD Deck Section>
Recording system Magnetic field modulation overwrite system
Regeneration system Noncontact optical
Recording and playback time Up to 80 minutes
Frequency characteristic 10 Hz to 20 kHz ± 2.0 dB
Wow and flutter Below the measurement limit
<General>
Input / output terminal Analog input : Route 3
Digital input : 1 system (optical)
Analog output : 1 system
Digital output : 1 system (optical)
Processor input / output : 1 system
Single subwoofer mono output
Speaker output : 1 system
Power consumption 97W
External dimensions Width 435x Height 90x Depth 420 mm
Weight 8.4kg
Attachment Remote control