Audio Database

Image of A-DS656
Commentary

This AV amplifier is compatible with Dolby digital and new format with 5.1 ch input.

The DSP processor uses Motorola's 24 bitDSP.

The built-in Cinema Re-EQ (Cinema Re-EQ) circuit allows you to re-correct the recorded sound signal with high frequency emphasis, assuming that the speaker is placed behind the screen.

The D/A converter is equipped with a 20-bit delta-sigma A/D and D/A converter.

A low-feedback circuit that minimizes the amount of NFB has been adopted, inheriting the technology of Integra's non-feedback circuit.

Equipped with a 5.1 ch input, it can be developed into new formats such as DTS and MPEG multi-channel by receiving the analog output audio signal through the processor.

Surround mode is equipped with all 6 modes including original mode.
In addition, you can create your favorite surround sound by fine-tuning the parameters.

With 3-D Bass, you can hear the deep bass from the front / center speakers more clearly.

The Midnight Theater feature compresses the dynamic range to make it easier to listen to small sounds during low-volume playback (Dolby Digital Only)

It features a smart scan controller and a rotary dial controller on the front panel for easy system setup and parameter settings.

Equipped with I. P. M. (Intelligent Power Management) function, when the TV is turned on / off, the power of the amplifier is automatically turned on / off in conjunction with the sound signal of the TV.

On-screen capability.

Equipped with 5.1 ch pre-out.

It comes with a remote controller with a learning function that can memorize the main operations of video devices such as TV and DVD, and audio devices such as CD player.

Model Rating
Type Digital AV center
Amplifier Unit
Rated Output (6 Ω, 1 kHz, THD 0.1%) Front : 110W + 110W
Center : 110W
Surround : 110W + 110W
Maximum Practical Output (6 Ω, EIAJ) Front : 145W + 145W
Center : 145W
Surround : 145W + 145W
Dynamic Power 165Wx2 (4 Ω)
105Wx2 (8 Ω)
Total harmonic distortion factor 0.1% (at rated output)
Cross modulation distortion factor 0.08% (front, at rated output)
Input Sensitivity / Impedance Phono MM : 2.5mV/50k Ω
Line : 200mV/50k Ω
Output Level / Impedance Pre out : 1.0V/470 Ω
Rec out (Tape1, 2/Video1, 2) : 150mV/2.2k Ω
Frequency characteristic 20 Hz ~ 30 kHz ± 1 dB (Stereo)
Signal-to-noise ratio (IHF-A) Phono:80dB
CD, Tape : 100 dB
Tone Control Maximum Change Bass : ± 10 dB (50 Hz)
Treble : ± 10 dB (10 kHz)
Damping factor 60 (Front, 8 Ω)
RIAA deviation ± 0.8 dB
<Video Part>
Input / output sensitivity / impedance of standard image terminal 1Vp-p/75 Ω
I/O sensitivity / impedance of S video terminal Y Signal : 1Vp-p/75 Ω
C Signal : 0.28Vp-p/75 Ω
Tuner Section
Practical sensitivity of FM Mono : 1.0 μ V/11.2 dBf
Stereo : 2.0 μ V/17.2 dBf
SN ratio (FM) mono:76dB
stereo:70dB
Harmonic distortion factor (FM) mono:0.1%
stereo:0.2%
<General>
Power consumption (Electrical Appliance and Material Control Law) 360W
External dimensions Width 435x Height 175x Depth 390 mm
Weight 13kg
Attachment Remote control with learning function