Nakamichi NAKREI FIDELA 300D
¥ 35,000 (around mid 1960 s)
Commentary
Stereo tape deck with built-in solid state recording re-amplifier.
It uses Fidera's unique bell drive tape mechanism with less wow and flutter.
It is equipped with a push-pull recording oscillator with a bias frequency of 96 kHz and an all-transistor recording and playback pre-amplifier.
The playback curve is adjusted to the NARTB (50 μ s), and precoded tape is also supported.
The two recording buttons enable multiple recording, simultaneous recording, and recording / playback of 4-track monaural.
Designed to be used both horizontally and vertically.
Equipped with an auto shut-off mechanism that stops automatically when the tape is finished.
The exterior uses an oil-finished walnut case and an anodized hairline panel.
Model Rating
| Type | Tape deck |
| Tape speed | 19cm/s, 9.5cm/s |
| Reel Size | No. 7 |
| Wow and flutter | Not more than 0.15 per cent rms |
| Frequency characteristic | 40 Hz to 18 kHz (19cm/s) 50 Hz to 15 kHz ± 2 dB (19cm/s) |
| Signal-to-noise ratio | 50 dB or more |
| Crosstalk | 60 dB or more |
| Distortion factor | 1% or less (0 VU) |
| Bias frequency | 96kHz |
| Recording and erasing method | AC bias AC Erase |
| Regenerative equalizer | NARTB Standard (50 μ s) |
| Input terminal | Microphone : 10k Ω Aux : 500k Ω |
| Output terminal | 0.54V/5k Ω |
| Pwer | 100 VAC / 117 V, 50Hz/60Hz |
| External dimensions | Width 300x Height 150x Depth 270 mm |
| Weight | 5.8kg |
| Accessories | No. 7 Empty Reel (1 Piece) Rubber Cap (2 pcs) Power cord |