DIATONE DS-10B

Commentary

A compact speaker system that can be mounted on the wall, pursuing high efficiency and sound reproduction.

A 20 cm cone type woofer is installed in the low range.
The edge uses a rubber-like urethane edge to achieve high compliance and low symmetry. In addition, by using a strong frame, resonance of the frame itself, which occurs during heavy bass reproduction, is suppressed as much as possible.

A 5 cm cone type tweeter is installed in the high range.
This unit is equipped with a sub-frame with an orifice structure in the chamber. By eliminating standing waves in the chamber, it prevents unwanted sound from sticking and realizes high-sound reproduction with excellent transient characteristics.
In addition, the center cap is made of titanium alloy with high rigidity and excellent specific elasticity, and by suppressing split vibration, a smooth high sound range is obtained.

A 90 dB output sound pressure level is achieved by adopting a powerful magnetic circuit and a bass reflex system.
In addition, the voice coil has excellent heat resistance to provide sufficient input resistance.

A 15 mm thick plate is used for the enclosure, and a strong structure is achieved through repeated modal analysis and hearing tests.
Wall mount brackets on the rear of the enclosure allow for wall mount to suit room conditions and preferences.

Model Rating

Method	2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type
Units Used	For low band : 20 cm cone type For high-pass : 5 cm cone type
Nominal impedance	6 Ω
Playback frequency band	45 Hz to 20 kHz
Crossover frequency	1.5kHz
Output sound pressure level	90dB/W
Max Input	50W
External dimensions	Width 240x Height 415x Depth 240 mm
Weight	6.5kg