McIntosh XRT26
¥ 2,200,000 (2 units 1 set, sold in May 1995)
Commentary
This 3-way speaker system uses the traditional multi-driver method.
It is equipped with 2 30 cm cone type woofers for low range, 20 cm cone type midrange for middle range, and 23 2.5 cm aluminum hard dome type tweeters for high range.
The tweeter column has precise phase control and realizes clear sound localization. In addition, the column itself supports continuous input of 250W.
The Woofer and Mid-range models use a Macintosh patented LD/HP (Low Distortion/High Performance : U.S. PAT. 5151934) magnetic circuit. The aluminum die-cast frame reduces unwanted vibration.
The Woofer and Mid-range units are mounted in a wallnut-finished enclosure of carefully selected top-of-the-line materials that carefully exclude the diffraction effects of sound waves to prevent disturbance of the radiation wave front.
You can also use the tweeter column by hanging it on the upper wall.
The input terminal is a 3-way independent type and can be bi-wired or tri-wired, and can be bi-amped or tri-amped.
It comes with an active equalizer unit so that it can be tuned to the sound condition of the room.
This equalizer functions as a compensator for the lowest frequency range and allows for a wide range of frequency response corrections.
Model Rating
Method | 3-Way / 26 Speaker / Closed System / Floor Type |
Units Used | For low band : 30.5 cm cone x2 For Medium Range : 20.3 cm Cone Type For high pass : 2.5 cm dome type x23 |
Reproduction frequency characteristic | 32 Hz to 22 kHz ± 2 dB |
Impedance | 4 Ω |
Output sound pressure level | 87dB/2.83V/m |
Recommended amplifier output | 200W ~ 1,000W Built-in automatic return overload protection |
Crossover frequency | 250 Hz, 1.5 kHz |
External dimensions | Tweeter Column : W 432x H 2184x D 381 mm (including Rum base) Base enclosure : 508 mm wide x 1105 mm high x 394 mm deep |
Weight | Tweeter Column : 31.5 kg (including Rum base) Base enclosure : 41.4 kg Total system weight : 147.8 kg |
Attachment : Active equalizer unit MQ109 | |
Feature | 5 points (70 Hz, 150 Hz, 300 Hz, 600 Hz, 1.2 kHz) each frequency boost / cut : + / - 12 dB Q Control Low-end correction circuit |