Audio Footsteps

Search for McIntosh products by Yahoo!
Search for used audio on Yahoo Auction!

XRT-22s
Commentary

The XRT series high-end speaker system.

The enclosure consists of a base cabinet of two woofer and one squaker, and a tweeter column with 23 dome-shaped tweeters. It realizes a deep and wide sound that covers the entire sound field while maintaining strong directivity and sense of orientation.
In particular, the column produces a semi-cylindrical waveform (uniformed wave form) that is different from the conventional spherical waveform, and the energy loss of sound transmission to a distant listening position is much smaller than that of the conventional one. This makes it possible to reproduce sound from floor to ceiling with an overwhelming solidity, scale, and delicate texture.

The cone type unit is designed to prevent radiation from the center cap to the high range. In addition, the woofer unit is floated from the enclosure by a rubber pedestal. Cushioning material is also inserted between the mounting frame and the woofer unit to completely eliminate factors that cause vibration of the unit to be transmitted to the enclosure.
The skorker is also secured to the enclosure with eight screws.
As for sound absorbing materials, cotton, which has a high S/N ratio for audibility, is used for the woofer part, and glass wool is used for the squaker part.

The Woofer Enclosure is a high density particle board with an Oak (oak) finish for excellent rigidity.
The Tweeter Column Enclosure is made of pure oak or walnut and has excellent characteristics in all aspects such as solidness and influence on sound as well as rigidity.
In both cases, only the Saran face is adopted, and by making the wood surface stand out, it gives a sense of dignity and high quality.

In order to bring out the goodness of the speakers, professional staff visit the room directly, adjust and set according to the characteristics of the room, and enjoy it in the best condition.

Model Rating
Method 3-Way / 26 Speaker / Closed System / Floor Type
Units Used For low band : 30.5 cm cone x2
For Medium Range : 20.3 cm Cone Type
For high pass : 2.54 cm dome type x23
Reproduction frequency characteristic 20 Hz to 20 kHz
Impedance 8 Ω
Output sound pressure level 88dB/W/m
Allowable input 250W (all 20 Hz to 20 kHz bands)
Crossover frequency 100 Hz, 250 Hz, 1.5 kHz
External dimensions Tweeter Column : Width 266.7x Height 2017.3x Depth 41.3 mm
Base cabinet : 654.1 mm wide x 1028.7 mm high x 322.3 mm deep
Weight Tweeter Column : 28.0 kg
Base Cabinet : 42.7 kg
Attachment Independent Free Stand CS-22
Dedicated Equalizer MQ-107