Marantz PM8000
¥ 65,000 (released in 1999)
Commentary
This is a pre-main amplifier of the C series that reexamines the thought and technology that Marantz has advanced for half a century and thoroughly implements the original policy of "the highest priority is the reproducibility of music".
Pure class A operation is adopted, and twin monaural construction is adopted.
Equipped with a 4-row active volume, it improves the SN feeling in the auditory sense.
It is equipped with Marantz original HDAM.
Equipped with a source direct switch and an active filter NFB-type tone control circuit.
High-quality sound condenser and other parts are used.
The front panel uses a gold finish and hairline finish aluminum panel.
Marantz Comes with a system remote control that enables simultaneous operation of products.
.JPG)
.JPG)
Model Rating
| Type | Pre-main amplifier |
| Rated Output (20 Hz to 20 kHz, Both Channel Drive) | Class AB : 100W + 100W (8 ohm) Class A : 25W + 25W (8 ohm) |
| Total Harmonic Distortion Factor (20 Hz to 20 kHz, 8 Ω) | Class AB : 0.015% Class A : 0.010% |
| Frequency Response (CD, Source Direct) | 10 Hz to 100 kHz + 0 -1dB |
| Input Sensitivity / Impedance | Phono MM : 2.5mV/47k Ω High level : 150mV/20k Ω |
| Phono maximum allowable input (1 kHz) | MM:150mV |
| RIAA deviation | 20 Hz -2dB/40Hz - 20 kHz ± 0.5 dB |
| Signal-to-noise ratio (IHF, A-network, input short) | Phono MM:85dB |
| Input / output terminal | Line input : 4 systems Tape I/O : 1 line Processor input / output : 1 system Phono input : 1 system CD-R/MD input / output : 1 system Headphone output : 1 system Speaker output : 2 channels |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption | 160W (Electrical Appliance and Material Control Law) |
| Maximum external dimensions | Width 440x Height 159x Depth 370.5 mm |
| Weight | 12.3kg |
| Attachment | System remote control |