MACTONE XC-30
¥ 38,500 (around the mid 1960 s?)
Commentary
This is a high-grade control amplifier that has been developed based on Marantz's R & D model and after a series of comparative studies on audibility.
The K ・ K ・ NF method is adopted for the first time in Japan, and excellent high-frequency characteristics are realized.
The tone control circuit is equipped with a rising point moving type circuit by frequency switching using K ・ K ・ NF method.
Various output circuits such as the main output circuit and the output circuit for tape recorder recording are reduced to 200 Ω or less by the cathode follower.
DC ignition is used for all stages.
Multi-channel output is possible with the separately sold split frequency unit.
Model Rating
Type | Stereo control amplifier | ||||
Circuit system | Equalizer and tone control by K ・ K ・ NF method | ||||
Distortion factor | 0.1% or Less (at Output 3 v) | ||||
Frequency characteristic | 30 Hz to 50 kHz ± 0 dB 10 Hz ~ 100 kHz + 0 -4dB |
||||
Input Sensitivity / Impedance | phono1, 2 : 1.5mV/50k Ω phono3 : 5mV/100k Ω Tape head : 1mV/500k Ω Tuner, aux : 200mV/1M Ω |
||||
Output impedance | Main output : 200 Ω or less Rec output : 200 Ω or less |
||||
Signal-to-noise ratio | phono:65dB tape:60dB Tuner, aux : 70 dB |
||||
Tone control | K ・ K ・ NF method frequency switching
|
||||
Filter | S-low filter : 50 Hz, 8 dB, 20 Hz, 17 dB | ||||
Multichannel output circuit | Transistor Type Split Circuit Unit (Sold Separately, NF Circuit DV-218) Low-pass / high-pass output circuit depending on the use Cutoff characteristics : 18dB/oct |
||||
Accessory circuit | Tape monitor Loudness control |
||||
Used vacuum tubes, etc. |
|
||||
AC outlet | Power switch interlock : 2 systems Power switch not linked : 1 system |
||||
Power supply voltage | 100 VAC, 50Hz/60Hz | ||||
Power consumption | 35W | ||||
External dimensions | Width 410x Height 160x Depth 230 mm | ||||
Weight | 7.3kg |