LUXKIT M-6P

Commentary

Power supply kit for measuring instrument series.

The M-6P is a compact power supply that can be used for driving the measuring instrument series and various circuit experiments. Although the measuring instrument series is a built-in dry battery type, it can provide a stable power supply by using the fixed output of M-6P.

The fixed output is directly wired (screwed) inside and taken out. However, it is separated into a measuring instrument connected to the input side and a measuring instrument connected to the output side. When more measuring instruments are used together or more advanced measurement is performed, consideration must be given to the mutual connection, especially the connection related to earth.
To cope with such a situation, the power supply is separated into two systems to prevent mutual interference.

The variable output can be taken out from the terminal installed on the panel surface, and power can be supplied in the variable range of ± 3 v to ± 15 v.

It has a built-in overcurrent protection circuit to protect the power supply from the operation during the experiment and the abnormality of the experiment circuit.

Model Rating

Type	Power supply kit
Variable Output Unit
Rated output voltage	± 3 V ~ ± 15 V
Rated output current	0 ~ 0.2A
Input variation	± 1.5% or Less (100 VAC ± 10%)
Load variation	Not more than 2%
Tracking deviation	Not more than 5%
Ripple voltage	3 mVrms or less (at maximum rated output)
Eddy current protection	Operates within 150% of rated output
<Fixed Output Unit>
Rated output voltage	+ / - 15 v
Rated output current	0 to 50 mA
Input variation	± 2% or Less (100 VAC ± 10%)
Load variation	+ / - 5% or less
Ripple voltage	5 mVrms or Less at Maximum Rated Output
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	20W
External dimensions	Width 227x Height 67x Depth 165 mm
Weight	1.6kg