LUXKIT A831
¥ 15,000 (1 unit, released in 1981)
Commentary
A woofer system kit specifically designed for 3D systems.
The unit is equipped with 25 cm cone type woofer.
Beading Oil Board (BOB) sheet is used as a cone for the diaphragm of this unit. BOB has improved Young's modulus by approximately 2 times and internal loss by approximately 1.5 times compared with conventional papermaking types. It also has strong aging characteristics.
The enclosure uses a unique linear acoustic load method, in which a front board is placed 20 mm in front of the unit mounting surface to apply moderate pressure and cut off unnecessary high frequencies.
High-density chip board is used for the plate material.
Model Rating
Method | 1-way, 1-speaker floor type ・ Linear acoustic load system |
Unit | For low band : 25 cm cone type |
Frequency characteristic | 28 Hz to 200 Hz 40 Hz ~ 2 kHz (With Front Board Removed) |
Impedance | 6 Ω |
Output sound pressure level | 88dB/W/m |
Rated input | 25W |
Max Input | 50W (Music) |
External dimensions | Width 332x Height 440x Depth 324 mm |
Weight | 10.5kg |