LUXMAN speaker accessories
- AS-7L
¥ 10,000 (around 1974)
¥ 13000 (around 1980)
A two way low-frequency debinding network.
It can also be used as 3-way by combining AS-7L and AS-7H.Split frequency 500 Hz, 800 Hz, 1.5 kHz Damping property 6dB/oct, 12dB/oct (switchable) Attenuator Constant impedance type External dimensions Width 233x Height 66x Depth 100 mm
- AS-7H
¥ 10,000 (around 1974)
¥ 13000 (around 1980)
A two way high frequency debinding network.
Split frequency 3 khz, 5 khz, 8 khz Damping property 6dB/oct, 12dB/oct (switchable) Attenuator Constant impedance type External dimensions Width 233x Height 66x Depth 100 mm
- AS-6
¥ 4,500 (around 1974)
¥ 6,500 (around 1976)
Constant impedance type attenuator.
The constant impedance method allows volume adjustment without loss of sound quality. The attenuation is a 2-dB step 11-step switching type that can attenuate up to a maximum of -20dB.
The handling capacity is 50W when the attached dummy load is connected.
It can be used for 4 Ω, 8 Ω or 16 Ω speakers.Operating frequency range 100 Hz to 30 kHz Distortion factor 0.11% (200 Hz, 100W, 16 Ω Load) Attenuation -20dB max, 2 dB step Handling capacity 50W (When Attached Dummy Load Is Connected) Compatible Speaker Unit 4 Ω, 8 Ω, 16 Ω External dimensions Diameter 92x Depth 107 mm
- AS-10
¥ 15,000 (around 1976)
Constant impedance type attenuator.
The constant impedance method allows volume adjustment without loss of sound quality. Attenuation is an 11-point 2-stage configuration.Operating frequency range 100 Hz to 30 kHz Attenuation 0 to 20 dB in 1 dB steps Handling capacity Up to 100W Compatible Speaker Unit 4 Ω, 8 Ω, 16 Ω External dimensions 92 mm wide x 78 mm high x 154.5 mm deep