KEF Model105.4
¥ 560,000 (1 set of 2, released in 1981)
Commentary
A floor-type speaker system developed as a successor to the Model105seriesII.
In the low range, 2 B200 which is 20 cm cone type woofer are mounted.
The well-known Bextron diaphragm is used for the diaphragm.
The mid-range is equipped with 11 cm cone type mid-range B110.
The T-33, a 3.3 cm soft dome tweeter, is installed in the high range.
It is equipped with a protection circuit S-STOP to prevent inadvertent use and troubles on the amplifier side.
The enclosure is hermetically sealed.
The unit layout adopts a linear phase configuration to achieve excellent orientation. In addition, a technology called Listening Window is installed to obtain the optimum stereo presence at the listener position. The directivity of the mid-range unit is further improved and the mid-range head assembly is finely adjusted horizontally and vertically so that the optimum listening area can be set wider.
The exterior is finished with a walnut finish.
The Model105.4 uses a computer-analyzed unit in the KEF Lab. In addition, it is shipped on a computer-controlled production line with left-right pair matching by a stereo system.
In addition, this system can be used as a reference system for studio use, and it is guaranteed with measured data of each unit.
Model Rating
Method | 3-Way, 4-Speaker, Sealed Type, Floor Type |
Units Used | For low band : 20 cm cone type (B200) x2 For Medium Range : 11 cm Cone Type (B110) For High Range : 3.3 cm Dome Type (T-33) |
Frequency characteristic | 55 Hz to 20 kHz ± 2 dB (2m on axis) 30Hz/30kHz -10dB |
Directional property | Horizontal : 20 kHz ± 5 ° Vertical : 10 kHz + / - 20 degrees Deviation within 1 dB |
Impedance | 8 Ω |
Output sound pressure level | 86dB/W/m |
Maximum output sound pressure level | 108dB |
Distortion factor | Second harmonic distortion (1m on axis, 90 dB) : 1% or less (50 Hz to 20 kHz) Third harmonic distortion (1m on axis, 90 dB) : 1% or less (30 Hz to 20 kHz) |
Allowable input | Program : 200W Continuous sine wave : 20 Vrms (20 Hz to 50 Hz) 28 Vrms or Less (100 Hz to 500 Hz) 20 Vrms or Less (1 kHz to 2.5 kHz) 7 Vrms or Less (4 kHz to 20 kHz) |
Protection circuit | S-STOP circuit, 70 v peak (DC ~ 50 kHz) |
Peak indicator | LED display (at 200W input) |
Internal volume | Low Pass : 40 liters Medium and high range : 8.5 liters |
External dimensions | Width 380x Height 936x Depth 350 mm |
Weight | 22kg |