JBL T420

Commentary

16cm2-way speaker unit developed for car audio.

The woofer uses the same SFG magnetic circuit as audio speakers to reduce distortion.
In addition, the voice coil of the drive system adopts a new method of edgewise winding with increased strength, heat resistance as well as efficiency.

The corn paper has a polypropylene coating that prevents direct moisture, such as water droplets that can enter when mounting the door, and prevents the corn from absorbing moisture in the air on a humid day.

The tweeter is angled at approximately 15 degrees and is designed to face the driver when mounted in the rear tray.

Strong aluminum die-cast is used for the frame.

There was a mount spacer sold separately.

Model Rating

Type	16cm2-way speaker unit
Frequency characteristic	70 Hz to 18 kHz
Allowable input	75W
Impedance	4 Ω
Sound pressure level	90dB/W/m
Magnetic flux density	Low pass : 11,900 gauss
Weight of magnetic circuit	1kg
Mounting Hole Diameter	12.7cm
Mounting Depth Dimension	5.5cm
Front External Dimensions	16.5x16.5cm
Weight	1.8kg
Sold Separately	Mount Spacer SK-M420 (2 pcs 1 set, ¥ 3,500)