JBL XTi100
¥ 88,000 (1 unit, around 2000)
Commentary
XTi series speaker system with hexagonal enclosure.
Two 20 cm cone type woofers are installed in the lower range.
Pulp cone with corrugation rib is used for the diaphragm, and bent pole piece is used for the magnetic circuit to suppress dynamic compression.
The mid-range is equipped with a 12.5 cm cone type mid-range.
Pulp cone is used for the diaphragm.
A 2.5 cm dome type tweeter is installed in the high range. This unit uses pure titanium diaphragm and aluminum voice coil.
The enclosure uses a bass reflex system.
This enclosure has a one piece structure that seamlessly integrates the front and side and the rear and side. It is a hexagonal enclosure consisting of four pieces (top, bottom, front side and rear side) that minimizes internal planarization and reduces internal standing waves.
It supports bi-wiring and bi-amplifier connections.
The speaker terminal uses a gold-plated binding post type for banana plugs.
Model Rating
| Method | 3-Way, 4-Speaker, Bass Reflex System, Floor Type |
| Units, etc. | For low band : 20.0 cm cone x2 For Medium Range : 12.5 cm Cone Type For high-pass : 2.5 cm dome type |
| Frequency characteristic | 30 Hz to 22 kHz |
| Output sound pressure level | 91dB/2.83V/m |
| Input impedance | 6 Ω |
| Allowable input | 100W(RMS) |
| Crossover frequency | 300 Hz, 3 kHz |
| External dimensions | Width 273x Height 1,130x Depth 342 mm |
| Weight | 24.0kg |