JBL SVA2100

Commentary

The SVA series speaker system adopts a symmetrical vertical array layout.

The SVA Series adopts the symmetrical vertical array (vertical virtual coaxial) method adopted in the K2 Series.
This system achieves both a wide frequency range and accurate sound image localization by the layout of a biradial horn and tweeter sandwiched between two woofers.

Equipped with 2 newly designed 25 cm cone type woofers in the lower range.

A horn type tweeter is installed in the high range.
A biradial horn is used in the horn section to ensure good directional characteristics with a wide service area and a soft dome type diaphragm.

It has a magnetic shield design.

The enclosure uses a bass reflex system.
On the exterior, the opening of the biradial horn has a Bar-like grain and a black oak-like finish.

The legs are equipped with adjustable acoustic isolation spikes made of aluminum die-cast, and vertical axis (acoustic axis) can be adjusted.

Bi-wire speaker terminal is used.

Model Rating

Method	2-Way, 3-Speaker, Bass Reflex System, Tall Boy Type, Anti-magnetic Design
Units, etc.	For low band : 25 cm cone x2 For High Frequency : Horn Type
Frequency characteristic	37 Hz to 20 kHz ± 2 dB 30 Hz to 20 kHz -6dB
Output sound pressure level	93dB/W/m
Impedance	8 Ω
Allowable input	300W(RMS)
Crossover frequency	1.2kHz
External dimensions	Width 368x Height 1,092x Depth 514 mm
Weight	43kg