Electro-Voice Interface:AIII
¥ 110,000 (1 unit, around 1979)
Commentary
A bookshelf speaker system in the Interface Series.
It has almost the same design as Interface : BIII except for a part such as the enclosure design.
A 20 cm cone woofer is installed in the middle and low range, and a 30 cm cone radiator is installed in the low range.
This radiator is driven by a 20 cm woofer in the same way as a conventional passive radiator. Interface : AIII does not simply support the lower frequencies, but rather allows the radiator to receive almost all of the lowest frequencies. It is combined with a 6 dB boost from a special SEQ equalizer to achieve excellent bass reproduction.
It is equipped with a 3.8 cm superdome tweeter equipped with an acoustic lens in the high range.
This unit uses a large magnet and a high-efficiency magnetic circuit in which magnetic fluid is sealed in the voice coil gap, resulting in efficiency two to four times higher than that of the conventional dome type. The dome is made of two layers of phenol and resin.
The front of the dome is equipped with an acoustic lens of acoustic form, which greatly improves the directional characteristics in the ultra-high range.
The enclosure is hermetically sealed.
.JPG)
Model Rating
| Method | 2-way, 2-speaker, passive radiator system ・ Bookshelf type |
| Unit | Low range : 30 cm cone radiator For Medium Range : 20 cm cone type For high-pass : 3.8 cm dome type |
| Frequency characteristic | 29 Hz to 20 kHz 35 Hz to 18 kHz ± 4 dB |
| Output sound pressure level | 92dB/W/m |
| Impedance | 8 Ω |
| Maximum allowable input | 25W (long-term average) 250W (peak) |
| Crossover frequency | 49 Hz (acoustic), 1.5 kHz |
| External dimensions | Width 391x Height 622x Depth 210 mm |
| Weight | 13.6kg |
| Attachment | SEQ equalizer |