Electro-Voice EV-Four A

Commentary

An improved and developed speaker system based on EV-Four.

A 30 cm cone type woofer is installed in the low range.
Special foamed resin is used for the edge part to increase linearity of large amplitude.

A 15 cm cone type skoker is mounted in the middle area.
This unit has a particularly low fo, one octave below the crossover point, to make the response in the used band as flat as possible.
It is mounted in a closed, independently braked enclosure to eliminate interference with the woofer.

A 6 cm cone type tweeter is installed in the high range.
The gap between the voice coil and yoke is filled with viscous material.

It is equipped with a level control that allows you to adjust the middle and high levels independently.

The enclosure has a four sided walnut finish.

Model Rating

Method	3-way / 3-speaker ・ bookshelf type
Units, etc.	For low band : 30 cm cone type For Medium Range : 15 cm cone type For high pass : 6 cm cone type
Frequency characteristic	30 Hz to 20 kHz
Impedance	8 Ω
Max Input	70W (peak)
Crossover frequency	400 Hz, 2.5 kHz
External dimensions	Width 635x Height 356x Depth 343 mm
Weight	20.0kg