DYNACO PAT-5
Released in 1972
¥ 125,000 (around 1976)
Kit : ¥ 110,000 (around 1976)
Commentary
A stereo preamplifier with an EPL switch to which a noise reduction system or an audio equalizer can be connected.
Two tape decks can be connected.
There was a wood case sold separately.
Model Rating
Type | Stereo preamplifier |
Output level | Tape out:200mV Output : 2 v (rated), 7 v (maximum) |
Input Sensitivity / Impedance | Phono1, 2 : 2.8mV/47k Ω Tuner, Tape1, 2 : 200mV/50k Ω |
Phono maximum allowable input | 100mV(1kHz) |
Total harmonic distortion factor | 0.05% or Less (20 Hz to 20 kHz) |
Cross modulation distortion factor | Not more than 0.05% |
Frequency characteristic | 10 Hz to 50 kHz ± 1 dB |
Signal-to-noise ratio | Phono:70dB High level:85dB |
Tone control | Bass : ± 10 dB (50 Hz) Treble : ± 10 dB (15 kHz) |
Filter | High:10kHz8-10dB) Low:15Hz(-12dB) |
Power consumption | 12W |
External dimensions | Width 343x Height 108x Depth 299 mm |
Weight | 5kg |
Sold Separately | Wooden Case DW-3 (¥ 8,900, around 1976) |