DENON SC-V11

Commentary

A speaker system that uses the P. P. D. D. Parallel method.

Two 8-cm cone woofers are installed in the lower range, and are driven by the P. P. D. D> (Push-Pull Dual Driver) Parallel method. In this method, the driving force and vibration equivalent mass are doubled by the push-pull operation of two speakers, thereby extending the playback range in the lower range.
In addition, by mounting the edge of one unit in the opposite direction, harmonic distortion is cancelled out to each other, thereby achieving clearer playback.

A 2 cm dome type tweeter is installed in the high range.

The enclosure uses a bass reflex system.
There were 2 variations of exterior, silver and wood grain.

Not only can it be hung on the wall by the hook provided on the back, but also by using optional parts sold separately, it can be installed on ceilings or walls, placed on the floor by the stand, and installed by the stand for the displacer.

Model Rating

Method	2-Way, 3-Speaker, Basref System, Bookshelf Type, Antimagnetic Design (EIAJ)
Units Used	For low band : 8 cm cone x2 For High Pass : 2 cm Dome Type
Frequency characteristic	65 Hz to 20 kHz
Average output sound pressure level	90dB/W/m
Input impedance	6 Ω
Maximum allowable input	120W(Peak) 60W(EIAJ)
External dimensions	Width 105x Height 228x Depth 140 mm
Weight	1.6kg
Attachment	2 speaker cords (approx. 10m)
Sold Separately	Speaker Bracket ASG-10 (2 pcs 1 set, ¥ 8,500)
Speaker Stand SPEAKER stand ASS-101 (2 pcs 1 set, ¥ 16,500)
External dimensions	Width 260x Height 750/800/850x Depth 270 mm (Height adjustable in 3 levels)
Weight	3.0 kg (1 unit)
Sold separately : Display Side Dedicated Stand ASG-11 (1 set of 2, ¥ 5,000)
External dimensions	Width 255x Height 100x Depth 100 mm
Weight	1.3 kg (1 unit)