DENON SC-11/SC-11s

Commentary

By further developing the know-how accumulated in the Super boy SC-101, this speaker system is designed to maximize the flexibility of usability such as layout - and position-free.

A 16 cm cone type woofer is installed in the low range.
It is a joint development unit of DENON and Peerless Co. (Denmark). It uses the same flat damper as the woofer of SC-304. In addition, it uses Scandinavian pulp for the material of the corn paper and the latest paper making technology is put into it to make a light and tough diaphragm.
In addition, it is composed of a large magnet equivalent to a 25 cm class woofer and heat-resistant voice coil, which reduces the burden on the tweeter and improves sound pressure and input resistance.

A 3.2 cm dome type tweeter is installed in the high range.
The newly developed diaphragm suppresses natural vibration and achieves smooth high-frequency characteristics.

The enclosure uses a rigid particle board, especially the front baffle, which is 18 mm thick.
The unit is fixed using a sandwich support system. The tweeter is supported from both sides of the frame by an aluminum plate and a sealing sheet. The woofer is firmly mounted by an aluminum die-cast ring that covers the entire frame.

There were SC-11 of pure maple wood-grain finish and SC-11s of silver metallic cabinet.

Model Rating

Method	2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type
Units Used	For low band : 16 cm cone type For high-pass : 3.2 cm dome type
Frequency characteristic	45 Hz to 22 kHz
Maximum allowable input	80W (program source)
Impedance	8 Ω
Average output sound pressure level	91dB/W/m
Crossover frequency	4kHz
External dimensions	Width 210x Height 355x Depth 217 mm
Weight	5.5kg