DENON DSW-101
¥ 18,000 (1 unit, around 2000)
Commentary
A subwoofer that uses the P. P. D. D method.
It uses the P. P.D. D. (Push-Pull Dual Driver) Parallel method originally developed by DENON.
In the P. P.D. D. Parallel method, the edge of one speaker unit is mounted in the opposite direction, so that the harmonic distortion is cancelled by each other.
In addition, since the two woofers are push-pull driven, the driving force and vibration equivalent mass are doubled, and the low-frequency reproduction range is expanded.
The unit is equipped with 2 12 cm cone type woofers.
The cut-off frequency can be continuously variable in the range of 50 Hz ~ 200 Hz, and finer adjustment is possible.
It is equipped with an auto power off function and automatically goes into standby state when there is no sound for several minutes during playback.
It returns to ON automatically when a signal is input.
The enclosure uses a bass reflex system.
There are 2 variations of exterior, wood grain and silver.
Model Rating
Method | Built-in Amplifier / 1-Way / 2-Speaker / Bass Reflex System / Floor Type / Anti-magnetic Design (EIAJ) |
<Woofer> | |
Units Used | For Ultra Low Band : 12 cm Cone Type x2 |
Maximum output sound pressure level | 104dB/m |
Amplifier Unit | |
Maximum power output | 40W(Peak) |
Input impedance | Line : 10k Ω High : 4.7k Ω |
Filter characteristic | 50 Hz ~ 200 Hz (Continuously Variable) |
Input terminal | High in(L/R) Line in |
Output terminal | Speaker system (L, R) Line out (stereo, mini jack) |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 32W |
<General> | |
External dimensions | Width 160x Height 340x Depth 258 mm |
Weight | 6.1kg |
Attachment | RCA pin code 2 speaker cords (approx. 3m) Slip Stopper x4 |