DENON DP-60L
¥ 90,000 (around 1981)
Commentary
Auto lift player equipped with auto lift mechanism with non-contact type end sensor.
The up / down speed of the arm is optimally controlled by the electronic servo lifter, protecting the record board and needle.
An arm pipe replaceable type is adopted for the tone arm part, and it is equipped with 2 of light mass straight tone arm and universal S-shaped tone arm.
It is compatible with all types of cartridges including high compliance type cartridges by exchanging the arms.
DENON quartz and AC servo motor are used for the rotating system to realize low wow flutter and high S / N ratio.
Model Rating
Type | Auto lift player |
Phono Motor Section | |
Drive system | Bidirectional servo direct drive |
Motor | AC servo motor |
Speed control | Two way servo DENON quartz |
Number of revolutions | 33 1/3, 45 rpm |
Wow and flutter | 0.015% W. rms or less (DENON measurement method) 0.02% W. rms or Less (JIS Measurement Method) |
Rotational speed deviation | 0.002% or less |
Speed switching mechanism | Soft Touch Push Button Type (Self-Illumination Type) |
Signal-to-noise ratio | 78 dB or more (DIN-B) |
Startup time | Within 1.5 Seconds (33 1/3) |
Load characteristic | 0% (Needle Pressure 100g Outer Circumference) |
Voltage characteristic | 0% for 90 ~ 110 V |
Brake | Electronic |
Turntable | Aluminum Die-cast 30.8 cm |
Moment of inertia | 200 kg / cm2(including turntable seats) |
Arm Section | |
Type | Static Balance with Damping / Shell Integrated Structure / Light Mass Straight Type Arm pipe replaceable (S-shaped arm pipe with standard 4P connector and special weight included) |
Effective length | 244mm |
Effective mass at straight arm | 5.5g (excluding cartridge) |
Overhang | 14mm |
Tracking error | 2.5 degrees or less |
Needle pressure control | 1 Rotation 2.5g (1 Scale 0.1g) |
Applicable Cartridge Dead Weight | Straight Type : Approx. 4 ~ 10g (Including Screws) S-shaped : Approx. 12 ~ 18g (Including Shell, etc.) |
Height adjustment | Approximately 4.5 mm |
Output code | Low capacity cord, approx. 1.2m |
Attachment mechanism | Anti-skating mechanism |
<General> | |
Cabinet | Bubinga natural wood 貼鏡 Finish, 20 mm Thick Dense Particle Board |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 14.5W |
External dimensions | Width 485x Height 180x Depth 410 mm |
Weight | Approx. 13 kg |
Attachment | Tone Arm Pipe (Straight and S-shaped) 1 Each Counterweight |