Audio Database

DP-55L
Commentary

Auto lift player with non-contact type auto lift mechanism.

Equipped with a non-contact type auto lift mechanism. In addition, the up / down speed of the arm is optimally controlled by the electronic servo lifter, protecting the record board and needle.

DENON quartz and AC servo quartz and AC servo motor that boast excellent rotational accuracy.
In addition, response to speed changes is improved by bidirectional servo.

Built-in electronic brake.

The tone arm is equipped with an S-shaped tone arm.

The cabinet scale has a wood-grain finish.

Model Rating
Type Auto lift player
Phono Motor Section
Drive system Two way servo, direct drive
Motor AC servo motor
Speed control Speed servo and phase servo by frequency detection
Number of revolutions 33 1/3, 45 rpm
Wow and flutter 0.015% W. rms or less (DENON measurement method)
0.02% w. rms or less (JIS measurement method)
Rotational speed deviation 0.002% or less
Speed switching mechanism Soft Touch Push Button Type (Self-Illumination Type)
Signal-to-noise ratio 78 dB or more (DIN-B)
Startup time Within 1.5 Seconds (33 1/3rpm)
Load characteristic 0% (Needle Pressure 100g Outer Circumference)
Voltage characteristic 0% for 90 ~ 110 V
Brake Electronic
Turntable Aluminum Die Cast 30 cm
Moment of inertia 200 kg / cm2(including turntable seats)
Tone Arm Section
Type Static Balance S-Shaped with Damping, Universal
Electronic Control Auto Lift Mechanism with Lifter Switch
Effective length 244mm
Overhang 14mm
Needle pressure control 1 Rotation 2.5g (1 Scale 0.1g)
Applicable Cartridge Dead Weight Approximately 15 ~ 19g (Including Shell, etc.)
Shell 9g (Equivalent to PCL-4)
Height adjustment Approx. 5 mm
Output code Low capacity cord, approx. 1.2m
<General>
Cabinet Karin Nakagawa wood-grain finish, 20 mm thick dense particle
Pwer 100 VAC, 50Hz/60Hz
Power consumption 14.5W
External dimensions Width 485x Height 165x Depth 400 mm
Weight 11.5kg