DENON DP-37F
¥ 54,800 (released in March 1984)
Commentary
A full auto player equipped with an arm that employs a dynamic servo tracer.
The turntable uses a DENON quartz turntable with magnetic recording detection method.
Stable rotational performance has been achieved by adding a bidirectional servo to the combination of magnetic recording detection method and quartz lock.
An electronically controlled contactless tone arm equipped with a dynamic servo tracer is used for the tone arm.
In the dynamic servo tracer, the low-frequency resonance due to the compliance of the cartridge and the effective mass of the tone arm is electronically damped in both horizontal and vertical directions, effectively suppressing the deterioration of crosstalk and cross-modulation distortion.
The arm body uses a light mass straight arm.
A mirror-finished cabinet has been adopted for the cabinet.
The cartridge is equipped with DL-65, a light weight MM cartridge with elliptical needle.
Model Rating
Type | Full auto player |
Phono Motor Section | |
Drive system | DENON quartz, bidirectional servo type direct drive |
Number of revolutions | 33 1/3, 45 rpm |
Wow flutter | 0.012% Wrms or Less (Rotating System) 0.02% Wrms or Less (JIS) |
Signal-to-noise ratio | 78 dB or more |
Startup time | Within 2 seconds (33 1/3 o'clock) |
Load characteristic | 0% (Needle Pressure 80g, Outermost Circumference) |
Turntable | Aluminum Die-cast 30 cm |
Arm Section | |
Type | Dedicated Shell Replacement Straight / Dynamic Balance Type, Electronic Needle Pressure Application, Dynamic Servo Tracer |
Effective length | 220mm |
Overhang | 16mm |
Needle pressure adjustment range | 0 ~ 3g (0.1g per scale) |
Applicable Cartridge Dead Weight | Approx. 4 ~ 9g (Including Screws and Nuts) |
Anti-skating | Contactless electronic |
Head shell | PCL-30BK |
Shell dead weight | 3.3g |
<Cartridge> | |
Type | MM Type |
Model Name | DL-65 |
Output voltage | 2.5mV |
Playback frequency | 20 Hz to 30 kHz |
Needle pressure | 1.8 ± 0.3g |
Needle exchange | DSN-65:¥5,000 |
<General> | |
Accessory function | Lifter switch Repeat switch |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | Approx. 7W |
External dimensions | Width 434x Height 145x Depth 410 mm (With Dust Cover Closed) |
Weight | Approx. 7.5 kg |
Sold Separately | Replacement Head Shell SPCL30BK (¥ 1,700) |