DENON DA-304

Commentary

Long type tone arm developed and designed for broadcasting stations.

High-quality miniature ball bearings are used for the horizontal rotating bearings in the rotary bearing section to achieve high sensitivity and high reliability over a long period of time. In addition, angular miniature bearings and a hardened and polished pivot are used for the upper and lower movable parts to achieve high sensitivity and stability.
In addition, the bearing is protected by a special elastic body influence of external vibration.

The arm stand is equipped with an anti-vibration device combined with viscoelastic material to block board vibration caused by external vibration.

A gold-plated terminal is used for the connection with the cartridge to improve reliability.

Double indicator micrometer type is used for the needle pressure adjustment mechanism.

Head shell exclusively for DA 304 has been adopted. This head shell prevents torsional resonance and reduces mass.
In addition, the cartridge can be removed and replaced freely.

Low-capacity output code is used for the output code.

Model Rating

Type	Long Type Tone Arm
Format	Static Balance J-Shaped Type
Total Length	381mm
Effective length	282mm
Offset Angle	18 °
Overhang	12.5mm
Tracking error	Max. 2.0 °
Needle pressure adjustment range	0 ~ 3g, 0.2g step
Applicable Cartridge Dead Weight Range	Approximately 11 ~ 20g (Including Shell)
Attached head shell	Dedicated Head Shell
Head shell dead weight	5g
Height adjustment range	45 ~ 75 mm (From Armboard to Pipe Center)
Mountable Board Thickness	10 ~ 25 mm (3-Point Nut Stopper)
Output code	Low Capacity Cord Direct Output, Approx. 0.5m