Audio Database

PMA-7.5E
Commentary

Pre-main amplifier of the point component series.

Independent heat sink layout reduces interference between the left and right channels.

The TU-7.5E, DCD-7.5E and DRR-7.5E are also equipped with a system remote controller capable of centralized control.

Model Rating
Type Pre-main amplifier
Power Amplifier Unit
Rated output 45W + 45W (20 Hz to 20 kHz, 8 Ω)
Maximum practical power 80W + 80W (6 ohm, EIAJ)
Total harmonic distortion factor 0.008% (1 kHz, 22.5W, 8 Ω)
Speaker load impedance A, B : 6 Ω ~ 16 Ω
A + B : 12 Ω ~ 16 Ω
Preamplifier Section
Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Line : 150mV/15k Ω
Rated output Rec Out:150mV
RIAA deviation 20 Hz to 20 kHz ± 0.5 dB
<General>
Signal-to-noise ratio Phono MM : 84 dB (at 5 mV input)
Line : 100 dB (source direct ON)
Power supply voltage 100 VAC, 50Hz/60Hz
Power consumption 100W
External dimensions Width 250x Height 96x Depth 343 mm
Weight 6.1kg
Remarks Included : Remote Control