DENON PMA-390II
¥ 39,800 (around 1996)
Commentary
A pre-main amplifier developed as a successor model of PMA 390.
The signal line leading to the input terminal and speaker terminal has been simplified by ensuring the proper placement of switches and volumes and by the proper placement of parts using DENON's unique short signal technology.
Equipped with three tone controls for bass, treble and variable loudness, you can adjust the bass and treble ranges.
In addition, there is a source direct switch. When this switch is turned ON, it bypasses the tone control circuit and balance circuit and is directly input to the power amplifier circuit via the main volume.
It is equipped with an equalizer amplifier compatible with MM cartridge.
It comes with a system remote control that supports DENON CD players, cassette decks and tuners.
There are 2 kinds, gold and black.
Model Rating
Type | Pre-main amplifier |
Power Amplifier Unit | |
Rated Output (CD → SP OUT) | 100W + 100W (4 ω, 1 kHz, EIAJ) 50W + 50W (8 Ω, 20 Hz to 20 kHz) |
Dynamic Power | 150W + 150W (2 Ω) |
Total harmonic distortion factor | 0.008% (1 kHz, 25W, 8 Ω) |
Line input frequency characteristic | 5 Hz ~ 100 kHz + 0 -3dB (output 1W, 8 Ω) |
Output bandwidth | 5 Hz ~ 40 kHz (Output 25W, 8 Ω, 0.1%) |
Output impedance | 0.1 Ω |
Speaker output terminal | A, B : 4 Ω ~ 16 Ω A + B : 8 Ω ~ 16 Ω |
Maximum headphone output | 20 mW (8 Ω) |
Preamplifier Section | |
Input Sensitivity / Impedance | Phono MM : 2.5mV/47k Ω Line : 150mV/25k Ω (when source direct is ON) |
Maximum Output / Rated Output | Rec Out:10V/150mV(1kHz) |
RIAA deviation | Phono : 20 Hz to 20 kHz ± 0.5 dB |
<General> | |
SN ratio (Audibility compensation A, input short circuit) | Phono MM : 86 dB at 5 mV input Line : 107 dB (when source direct is ON) |
Tone control characteristics | Bass : 100 Hz, ± 8 dB Treble : 10 kHz, ± 8 dB |
Variable loudness control | 50Hz:+10dB 10kHz:+5dB |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Power consumption | 138W |
External dimensions | Width 434x Height 120x Depth 282 mm |
Weight | 6.2kg |
Attachment : System Remote Control RC-176 | |
Remote control system | Infrared pulse system |
Pwer | 2 UM-3 (AA) |
External dimensions | 55 mm wide x 194 mm high x 18 mm deep |
Weight | 100g (including dry batteries) |