DB SYSTEMS DB-6/DB-6M
DB-6 : ¥ 265,000 (1 unit, around 1978)
¥ 220000 (1 unit, around 1979)
DB-6M : ¥ 255,000 (1 unit, around 1978)
¥ 210000 (1 unit, around 1982)
Commentary
A power amplifier named "The Precision Power amp" by its developers.
The DB-6 is a stereo power amplifier, and the DB-6M is a monaural power amplifier that internally bridges the left and right channels of the DB-6.
It is designed with an emphasis on low distortion, high stability, and smooth recovery during clipping.
Equipped with LED peak indicator.
Model Rating
Model Name | DB-6 | DB-6M |
Type | Stereo power amplifier | Monaural power amplifier |
Rated Output (Both channel drive) | 60W + 60W (4 Ω) 40W + 40W (8 Ω) |
225W (4 Ω) 140W (8 Ω) |
Input impedance | 50k Ω (300 pf) | |
Input sensitivity | 1.0V | |
Total harmonic distortion factor (8 Ω at rated output) |
0.003% or Less (20 Hz to 20 kHz) 0.0008% or Less (1 kHz) |
0.008% or Less (20 Hz to 20 kHz) 0.0015% or Less (1 kH) 0.02% or Less (20 Hz ~ 20 kHz, 4 Ω) |
Intermodulation distortion factor (SMPTE method) | Not more than 0.002% | |
Frequency characteristic | 20 Hz ~ 40 kHz + 0 -1dB | |
Signal-to-noise ratio | 112 dB (IHF-A at 1 V input) | |
Damping factor | 400 or More (20 Hz to 1 kHz) 40 or More (20 kHz) |
200 or More (20 Hz to 1 kHz) 20 or More (20 kHz) |
Slew rate | 15 V / μ sec or more | 30 V / μ sec or more |
TIM (Transient Intermodulation Distortion) | 0.04% or Less (3.18 kHz : 15 kHz = 4 : 1, 100 kHz) | |
Crossover notch | 0.01% or Less (40 kHz) | |
Subsonic filter | 12dB/oct (-3dB at 15H) | |
Pwer | 100 VAC, 50Hz/60Hz | |
Power consumption | 52W (No signal) | |
External dimensions | Width 406x Height 124x Depth 325 mm | |
Weight | 8.2kg |