CORAL CP-301/CP-301u
CP-301 : ¥ 33,500 (around 1960 s?)
CP-301u : ¥ 27,500 (around 1960 s?)
Commentary
A 2-speed record player made of carefully selected precision processed materials.
CP-301 is a model with a cabinet and CP-301u is a model without a cabinet.
A large hysteresis synchronous motor with 4 poles and 16 coils is used for the mechanism part.
A 30 cm static balance pipe arm is used for the tone arm.
Sapphire pivot and ball bearing are used for this arm.
In addition, a plug-in type is adopted for cartridge mounting, and JIS / EIA standard cartridges can be mounted.
A newly designed MM cartridge is attached to the cartridge.
Model Rating
| Type | Record player |
| <Player Part> | |
| Phono motor | 4-pole hysteresis synchronous motor |
| Number of revolutions | 33 1/3rpm, 45 rpm |
| Turntable | 30 cm Aluminum Alloy Made |
| Motor panel | Aluminum alloy |
| Signal-to-noise ratio | 45 dB or more |
| Wow | Not more than 0.25% |
| Tone arm | 30 cm Static Balanced Pipe Arm European standard 4-terminal plug-in head JIS EIA Standard Cartridge Mountable Needle pressure direct reading system |
| Cartridge Section | |
| Format | MM Type |
| Response | 20 Hz to 22 kHz |
| Sensitivity | 5mV |
| Compliance | 5x10-6cm/dyne |
| Channel balance | ± 1 dB |
| Needle pressure | 1.5g ~ 2.5g |
| Needle tip | 0.65 mil diamond needle |
| <General> | |
| Power supply voltage | 80 VAC ~ 117 V, 50Hz/60Hz |
| Power consumption | 15W |