Celestion Ditton25

Commentary

Ditton-series speaker system.

It is equipped with UL12 which is 30 cm cone type woofer in the low range.
This unit uses fiber cone with viscoelastic synthetic resin coating to ensure high rigidity, and neoprene roll edge is used for the edge.

's unique 30 cm passive radiators called ABR are combined in the low band. Celestion
The diaphragm of this unit has a special double structure made of lightweight and highly rigid synthetic resin and is held by a neoprene double roll suspension.
The operating mass is precisely designed and tuned with the woofer. In addition, the low-frequency output of opposite phases below the fo of the woofer and a sharp drop in low-frequency output, the ABR always vibrates in phase with the woofer and enables playback in the low-frequency range below fo.

In the middle area, it is equipped with 2 HF1300 which is 3.8 cm dome type skoker.
This unit was adopted for the BBC monitor and uses a phenol dome.

The HF2000, a 2.5 cm dome tweeter, is installed in the high range.
This unit was also used as a BBC monitor speaker.

There were two variations of the enclosure finish : walnut and cheek.

Model Rating

Method	3-way, 4-speaker, passive radiator system, floor type
Units Used	For Low Range : 30 cm Cone Type (UL12) Medium : 2 x 3.8 cm dome type (HF1300) For High Frequency : 2.5 cm Dome Type (HF2000) Passive radiator : 30 cm flat (ABR)
Frequency characteristic	20 Hz to 40 kHz
Impedance	4 Ω ~ 8 Ω
Max Input	60W(DIN)
Output sound pressure level	96dB/7W/m
Crossover frequency	2 kHz, 9 kHz
External dimensions	Width 360x Height 810x Depth 280 mm
Weight	19kg