B&W Nautilus HTM2

Commentary

This center speaker is a scaled down version of HTM1 while satisfying the standards of N800 series.

A 16.5 cm cone type woofer is installed in the low range.
The diaphragm is an FST unit with a Kevlar cone. The FST maximizes the effect of Kevlar by improving the response time of the cone and sound transmission integrity, and the frame is designed to minimize the impedance to airflow from the rear of the driver.

A 2.5 cm metal dome type tweeter is installed in the high range.

The enclosure has a curved cabinet structure and uses a bass reflex system.
In addition, a matrix structure is adopted inside, and the cabinet is reinforced from the inside by a three dimensional honeycomb structure to suppress the coloring.
There are 3 variations of the finish of the exterior, black ash, red cherry and cherry.

As a separately sold option, there is a special stand that can change the elevation angle in 3 stages.
This stand comes in 2 color variations, black and silver.

Model Rating

Method	2-way, 2-speaker, bass reflex system, center type, magnetic protection design
Unit	For low band : 16.5 cm cone type For high-pass : 2.5 cm dome type
Frequency characteristic	42 hz to 30 khz -6dB 49 hz to 22 khz -3dB
Frequency response	56 Hz to 20 kHz ± 3 db
Output sound pressure level	88dB/2.83V/m
Nominal impedance	8 Ω
Crossover frequency	3kHz
Recommended power amplifier output	50W ~ 120W (at 8 Ω)
External dimensions	Width 486x Height 277x Depth 287 mm
Weight	9.5kg
Sold separately : Speaker Stand NHTM-ST (1 unit, ¥ 70,000)
External dimensions	Width 521x Height 295x Depth 312 mm
Weight	13.3kg