Aurex SR-355/SR-355D

Commentary

A record player with a sandwich structure that is resistant to howling.

SR-355 and SR-355D are basically the same model, only the model name is different.

A turntable equipped with a strobe illuminator is adopted.

Uses a direct drive system that uses a DC servo motor as the drive motor.

33 1/3 and 45 rotation speed fine adjustment knobs are mounted.

The tone arm uses a static balance S-shaped tone arm.
Equipped with oil dump elevation mechanism and needle pressure direct reading counter weight.

Equipped with an anti-skating mechanism and can be easily adjusted with the needle pressure-compatible scale.

Needle pressure direct reading type is adopted for needle pressure application.

The cartridge comes with a C-210M MM cartridge.

The cabinet has a sandwich structure, in which a thick steel board is used for the player board and four insulators are used to sandwich the cabinet from above and below. The steel board suppresses the sound of the cabinet and the insulators absorb vibrations from outside.

Model Rating

Type	Record player
<Turntable portion>
Motor	DC servo motor
Drive system	Direct drive system
Number of revolutions	33 1/3, 45 rpm
Wow flutter	0.04%(WRMS)
Signal-to-noise ratio	60dB
Turntable	31 cm aluminum die-cast, 1.6 kg
Tone Arm Section
Type	Static balance system S-shape type
Effective length	222mm
Tracking error	+ / - 2 degrees
Overhang	14mm
Needle pressure variable range	0 ~ 4g
Weight of mounting cartridge	5.5g ~ 12g (When Using Attached Head Shell)
Cartridge Section
Type	MM Type (C-210M)
Frequency characteristic	20 Hz to 20 kHz
Output voltage	3 mv (1 kHz, 50mm/s)
Separation	25dB
Channel balance	1dB
Compliance	10x10-6cm/dyne
Recommended load resistance	50k Ω
Needle tip	0.5mil
Needle pressure	1.5g
Exchange needle	N-210C(¥2,000)
Dead weight	5.3g
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	4W
External dimensions	Width 471x Height 183x Depth 373 mm
Weight	12kg