Aurex SR-220

Commentary

A record player with an auto-return and auto-cut mechanism.

The specifications of the SR-220 and SR-220M are common and only the external finish is different.
The SR 220 has a Shiraki style finish, and the SR 220 m has a metallic finish.

A belt drive system is adopted for the turntable part, and a 16-pole synchronous motor is used for the drive motor.

Equipped with an auto return mechanism, the arm automatically rises when the record ends and returns to the arm rest position.
Also equipped with an auto-cut switch that can perform this operation even while playing.

Equipped with an anti-skating mechanism, you can adjust the left and right channel balance by canceling the inside force.

Insulators are used to prevent howling by absorbing vibrations transmitted through floors and racks.

A convenient needle pressure direct reading type is used for needle pressure application.

The cartridge is equipped with C-230M MM type cartridge.

Equipped with an overhang checker.

Model Rating

Type	Record player
<Turntable portion>
Motor	16-pole synchronous motor
Drive system	Belt drive system
Number of revolutions	33 1/3, 45 rpm
Wow flutter	0.08%(WRMS)
Signal-to-noise ratio	48dB
Turntable	31 cm Aluminum Die Cast, 1 kg
Tone Arm Section
Type	Static Balance S-shaped
Effective length	222mm
Tracking error	+ / - 2 degrees
Overhang	14mm
Needle pressure variable range	0 ~ 4g
Weight of mounting cartridge	4g ~ 11g
Cartridge Section
Type	MM Type (C-230M)
Frequency characteristic	20 Hz to 20 kHz
Output voltage	3 mv (1 kHz, 50mm/s)
Separation	20dB
Channel balance	1dB
Compliance	10x10-6cm/dyne
Recommended load resistance	50k Ω
Needle tip	0.5mil
Needle pressure	1.5g
Exchange needle	N-210C(¥2,000)
Dead weight	5.3g
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	6W(50Hz) 5.5W(60Hz)
External dimensions	Width 448x Height 155x Depth 363 mm
Weight	6.5kg