Aurex SR-10A
¥ 32,000 (around 1960 s)
Commentary
A record player that adopts the autocut / Oatley turn system.
A belt drive system is adopted for the drive system, and vibration and noise are cut off by transmitting the rotation of the motor to the turntable by the belt. A polyurethane belt is used for the belt.
A 4-pole synchronous motor is used as the drive motor.
It is equipped with an auto-return mechanism that automatically returns the pickup and stops the turntable when the performance is finished. It is also equipped with an auto-cut mechanism that can stop during the performance to improve operability.
30 cm aluminum die-cast is used for the turntable.
The tone arm uses a static balanced pipe arm with a lateral balancer.
The European style plug-in head is adopted for the head shell part, and the cartridge can be replaced.
A MM type cartridge is used for the cartridge, and a long-life ultra C record needle is used for the needle tip.
It is finished with wood grain using natural walnut produced in North America.
Model Rating
| Type | Record player |
| Cartridge | MM Type |
| Output voltage | 5 mv (1 khz, 5cm/s) |
| Frequency characteristic | 20 Hz to 20 kHz ± 2 dB |
| Crosstalk | 25 dB or More (1 kHz) |
| Output balance | Within ± 1 dB |
| Needle tip | 0.7 mil Ultra C (N-4C) |
| Needle tip compliance | 10x10-6cm/dyne |
| Tone arm | Static balanced type pipe arm With Lateral Balancer European standard plug-in head system |
| Needle pressure | 3g ~ 4g |
| Motor | 4-pole synchronous motor |
| Turntable | 30 cm Aluminum Die Cast |
| Number of revolutions | 33 1/3, 45 rpm |
| Uneven rotation | Not more than 0.1% |
| S/N | 35 dB or more |
| Pwer | 100 VAC, 50Hz/60Hz |
| Power consumption | 15W |
| External dimensions | Width 470x Height 180x Depth 360 mm |
| Weight | 11kg |