TOSHIBA PT-884
¥ 99,800 (around 1973)
Commentary
This is a 4-channel tape deck corresponding to the 4-channel model of PT 862 d.
4-channel / 2-channel recording / playback is available.
It uses a 3-head system that enables playback monitoring while recording.
It uses a unit-type printed circuit board that can maintain uniform performance and high reliability over a long period of time.
Uses bias erase oscillation circuit with less distortion.
In order to demonstrate the performance of highly sensitive tapes (Hi-Fi tape / SH-7), a tape selector switch is mounted.
In addition, the bias current can be adjusted while watching the meter.
Uses a rotation start type lever.
Equipped with a mechanical auto-shutoff mechanism that automatically turns off the mechanism when the tape is finished.
Equipped with an easy-loading mechanism for easy tape attachment and detachment.
Equipped with a tension servo mechanism for smooth tape travel.
It has a headphone port.
Equipped with a 4-digit tape counter.
Equipped with a large level meter.
If you are recording from a stereo set that is not a discrete 4-on the PT 884, you will need a CD-4 Demodulator SY 504.
Model Rating
Type | Stereo tape deck |
Tape Speed | 19cm/s, 9.5cm/s, 4.8cm/s |
Track system | 4-track (4 ch) |
Recording and erasing method | AC Bias, AC Erase |
Output voltage | 0 ~ 1 V |
Frequency characteristic | 19cm/s : 20 Hz to 25 kHz 9.5cm/s : 30 Hz to 15 kHz 4.8cm/s : 30 Hz to 9 kHz |
Distortion factor | 1% |
Signal-to-noise ratio | 56 dB or more |
Wow and flutter | Not more than 0.09% |
Input sensitivity | MIC : -65dB/10k Ω Line in : -23dB/300k Ω Din : -43dB/10k Ω |
Output level | Line out : 0 ~ 1V/10k Ω Din : 0.5/10k Ω Headphone : 8 Ω |
Semiconductor used | IC : 8 Transistor : 24 Diode : 22 pcs |
Pwer | AC100V 50Hz/60Hz |
Power consumption | 60W |
External dimensions | Width 401x Height 443x Depth 222 mm |
Weight | 16kg |