TOSHIBA PT-862D

Commentary

Stereo tape deck supporting 3 speeds.

It uses a 3-head system that enables playback monitoring while recording.

It uses a unit-type printed circuit board that can maintain uniform performance and high reliability over a long period of time.

Uses bias erase oscillation circuit with less distortion.

In order to demonstrate the performance of highly sensitive tapes (Hi-Fi tape / SH-7), a tape selector switch is mounted.
In addition, the bias current can be adjusted while watching the meter.

Uses a rotation start type lever.

Equipped with full mechanical auto shut-off mechanism.
In this mechanism, the switch is turned ON while the tape is running, and the motor is rotated by the plunger. When the tape is finished, the switch is released, and the cam operates at the same time as the motor stops. The pinch roller moves away from the capstan in conjunction with the main lever pin. This operation is performed by turning off the power switch so that it can operate reliably even in the case of an unexpected power supply accident.

Equipped with an easy-loading mechanism for easy tape attachment and detachment.

Equipped with a tension servo mechanism for smooth tape travel.

It has a headphone port.

Equipped with a 4-digit tape counter.

Equipped with a large level meter.

Model Rating

Type	Stereo tape deck
Tape Speed	19cm/s, 9.5cm/s, 4.8cm/s
Track system	4 tracks
Recording and erasing method	AC Bias, AC Erase
Output voltage	0 ~ 1 V
Frequency characteristic	19cm/s : 20 Hz to 25 kHz 9.5cm/s : 30 Hz to 15 kHz 4.8cm/s : 30 Hz to 9 kHz
Distortion factor	1%
Signal-to-noise ratio	56 dB or more
Wow and flutter	Not more than 0.09%
Input sensitivity	MIC : -65dB/10k Ω Line in : -23dB/330k Ω Din : -43dB/10k Ω
Output level	Line out : 0 ~ 1V/10k Ω Din : 0.5/10k Ω Headphone : 8 Ω
Semiconductor used	IC : 4 Transistor : 12 Diode : 7 pcs
Pwer	AC100V 50Hz/60Hz
Power consumption	55W
External dimensions	Width 395x Height 355x Depth 188 mm
Weight	12kg