Audio Database

PC-4280
Commentary

A 3-head cassette deck with 3 power supplies.

A 3-head configuration has been adopted for the head section, and high quality recording has been achieved by ensuring the characteristics required for each head.
In addition, simultaneous recording and monitoring is possible only with 3 heads.

It is equipped with a scrape filter to reduce modulation noise that causes distortion.
A high-precision roller with a ruby bearing is placed behind the erasing head so that the tape path is shortened and the moment of inertia of the roller itself absorbs the slight vibration of the tape.

Equipped with a 6 kHz oscillator, it can adjust the azimuth to adjust the verticality of the head.
The recording sensitivity of the tape can also be adjusted with a 440 Hz oscillator.

Uses a 3-power supply system with a built-in DC-DC converter.
The installed DC converter is a highly efficient converter that operates in the input voltage range of 7 to 16 v. It can be used with 8 single dry cells (10 hours continuous use) or car battery (with car adapter) with DC power supply. It is a component deck with 100 v AC (with AC adapter).

Equipped with a wide range peak level meter of -40dB to + 6 db.
In addition, a meter light switch with lock position is mounted.

Equipped with a battery check.

The bias and equalizer can be switched to two levels.

Equipped with a tape monitor changeover switch.

Equipped with a low-cut filter and limiter switch.

It comes with an accessory box, shoulder belt and dust cover.

The PC 4280 can be combined with a microphone mixer MX 4280 and an active speaker SS 4280 w to create a mini-studio feel.

The MX 4280 Microphone Mixer is capable of mixing with six microphones or combining up to six microphones and lines (Phono2ch). It also features low-cut and high-cut filters, a 30-dB microphone attenuator, a level meter that displays the mixing level, and a 3-power supply.

The SS-10W active speaker system has a built-in monaural amplifier with a rated output of 4280 w and can be connected to the output terminal on the deck.

Model Rating
Type Cassette deck
Track system Stereo
Bias erase 105kHz
Tape Speed 4.8cm/s
Adaptive tape Normal, Ferrichrome, AX (chrome)
Heads Recording : ferrite head
Playing : AS heads
Erasing : ferrite heads
Wow and flutter 0.07%(WRMS)
Early Winding Time (C-60) 105 seconds
Frequency characteristic 20 Hz to 18 kHz
SN ratio (AX tape) 60dB
Total Distortion Factor (0 dB, 400 Hz) 0.7%
Input terminal Line : 100mV/50k Ω
Mic : 0.25mV/600 Ω ~ 10k Ω
Output terminal Line : 0.4V/50k Ω
Headphone : 5.0mW/8 ohm
Semiconductor used ICx2
Transistor x57
Diode x26
Pwer 100 VAC, 50Hz/60Hz
DC12V
Power consumption 300mW
External dimensions Width 300x Height 145x Depth 175 mm
Weight 3.4kg
Attachment Accessory box
Shoulder belt
Dust cover
Sold Separately Microphone Mixer MX-4280 (¥ 79,800)
Active Speaker System SS-4280W (2 pcs 1 set, ¥ 60,000)