Audio Database

SB-M07
Commentary

A pre-main amplifier with two power amplifiers.

Two types of amplifiers, low power and high power, are used for the output section, allowing for a wide dynamic range source.

A gain-change-type equalizer amplifier is used.

The structure is designed to minimize interference between each unit, and the signal path is minimized to ensure sound quality.

Model Rating
Type Pre-main amplifier
Continuous output 100W + 100W (20 Hz ~ 20 kHz, 8 Ω)
Total harmonic distortion factor 0.005% (at 1/2 rated output)
Output bandwidth 8 Hz ~ 40 kHz (0.02%, 8 Ω)
Cross modulation distortion factor 0.005%(60Hz:7kHz=4:1)
Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
Phono MC : 0.2mV/100 Ω
Tuner, Aux/CD, Tape : 150mV/47k Ω
Phono maximum allowable input MM : 200 mv (1 kHz, 0.007%)
MC : 15 mv (1 kHz, 0.007%)
Signal-to-noise ratio MM:86dB
MC:69dB
Aux/CD : 107 dB (IHF, A Network)
Power consumption 200W
External dimensions Width 420x Height 128x Depth 338 mm
Weight 8.7kg