Audio Database
SCM20
Commentary

This speaker system was developed as the ATC brand's first compact studio control monitor.
It was born after three and a half years of research and development, because the common sense of "compact = low cost" is an obstacle to quality.

A 18 cm cone woofer is installed in the low range.
The gap length of the huge magnetic circuit is set to 20 mm, which is several times longer than usual, and the distortion is reduced by moving the short voice coil with winding width of 8 mm in the uniform sea surface.
In addition, a sturdy aluminum die-cast frame is used for the frame.

The high-frequency band is equipped with a 2.5 cm soft dome tweeter similar to the SCM100A large-size studio monitor.
Magnetic efficiency and input resistance are improved by magnetic fluid.

The crossover network employs large air-core coils and high-pressure metalized polypropylene capacitors.

Although it is a small speaker, the baffle thickness is 36 mm, and the total weight is approximately 23 kg, making the structure very strong.
In addition, there were 4 patterns of surface finish, and you could choose your favorite finish.

There was a speaker stand as an option sold separately.

Model Rating
Method 2-Way, 2-Speaker, Airtight Type, Bookshelf Type
Units Used For low band : 18 cm cone type
For high-pass : 2.5 cm dome type
Frequency characteristic 60 hz to 20 khz -6dB
80 Hz to 12 kHz ± 2 dB
Directional property Horizontal ± 90 °, Vertical ± 10 °
Output sound pressure level 83dB/W/m
Maximum sound pressure level 108 dB SPL (1m, continuous input)
Recommended amplifier output 100W ~ 300W
Impedance 8 Ω
Crossover frequency 2.8kHz
External dimensions Width 240x Height 440x Depth 310 mm
Weight 22.7kg
Optional : Dedicated Speaker Stand
External dimensions Height 460 mm