AR(Acoustic Research) AR-5
¥ 93,000 (1 unit, around 1973)
¥ 104,000 (1 unit, around 1974)
Commentary
This 3-way speaker system combines the unit used in the AR-3a with a specially designed woofer.
A 25 cm cone type woofer is installed in the low range.
The cone paper of this unit is formed by a low vacuum process, and the sound quality of the cone material itself, which was used for conventional paper and polystyrene, is reduced. In addition, a polyurethane-based material is used for the edge to reduce amplitude distortion in the low range.
Equipped with a 3.8 cm dome mid-range in the mid-range and a 2 cm dome tweeter in the high-range.
Level control is provided for the middle and high frequencies.
The enclosure uses an acoustic suspension system and has a walnut oil finish on the exterior.
Model Rating
Method | 3-way, 3-speaker, acoustic suspension system ・ Bookshelf type |
Units Used | For low band : 25 cm cone type For Middle Area : 3.8 cm Dome Type For High Pass : 2 cm Dome Type |
Impedance | 8 Ω |
Minimum amplifier output | 20W (RMS, one channel) or more |
Crossover frequency | 650 Hz, 5 kHz |
External dimensions | Width 343x Height 610x Depth 292 mm |
Weight | 17.8kg |