Audio Database

ST-3050
Commentary

An FM/AM tuner that improves sound quality from pursuit of waveform transmission.

The front-end section uses a linear frequency varicon, a high-frequency low-noise transistor, and an excellent local coil to achieve more faithful frequency conversion.

In the IF stage, two ceramic filters of two element type with emphasis on group delay characteristics are used to improve sound quality, and selectivity and SN ratio are improved by a highly integrated monolithic IC and a differential limiter amplifier configuration.

The MPX stage is equipped with a PLL system that realizes excellent separation characteristics and a double differential switching system that has flat frequency characteristics from high to low frequencies.
In addition, high-density ICs corresponding to 132 elements are used for the switching circuit and oscillation circuit to improve reliability.

A Cebi Czech type low-pass filter with a phase delay time of 5.5 μ s is adopted in the latter part of the MPX section to realize excellent characteristics and faithful waveform transmission.

The AF part uses a 2-stage direct connection circuit with a stabilized power supply.

The AM tuner uses a frequency linear type varicon and high-integration IC.

Equipped with MPX High Blend Switch to reduce noise in FM stereo reception with weak input signal.

It is equipped with an FM muting switch that can cut noise between stations.

Multi-path waveform observation oscilloscope terminal and FM4ch MPX out terminal are mounted.

Model Rating
Type FM/AM Tuner
FM Tuner Section
Receiving frequency 76 MHz to 90 MHz
Sensitivity 1.8 μ V
Selectivity 60dB
Capture ratio 1.0dB
Image Interference Ratio (82 MHz) 55dB
IF Interference Ratio (82 MHz) 70dB
Spurious interference ratio (82 MHz) 85dB
AM suppression ratio 50dB
Signal-to-noise ratio 70dB
Frequency characteristic 20 Hz to 15 kHz + 0.2 -1.0 dB
Separability 45dB(1kHz)
35dB(10kHz)
Leak Carrier (19 khz, 38 khz) 60dB
Output voltage Variable : 0.7 V
<AM Tuner Section>
Receiving frequency 520 kHz to 1610 kHz
Sensitivity 25 μ V
Selectivity 25dB
Image interference ratio 45dB
IF interference ratio 40dB
<General>
Pwer 100 VAC, 50Hz/60Hz
Power consumption 9W
External dimensions Width 386x Height 115x Depth 309 mm
Weight 4.8kg