Technics EPC-85SM(210C)
¥ 14,000 (around 1970)
Commentary
MM type cartridge which is a lower model of EPC-84SM.
High-energy platinum and cobalt magnets are used for the vibrator. At that time, the best magnet in the world (maximum energy product 14x106G ・ Oe) to reduce the weight of the vibrator.
In order to demonstrate the performance of platinum and cobalt magnets, we adopted a newly developed magnetic flux concentration type vibrator to improve power generation efficiency.
In addition, the vibrator supporting point is clarified by the special suspension wire system, and non-linear vibration is suppressed.
A micro-elliptical needle is used to raise the high-resonance frequencies above the range of audibility and to improve the frequency-characteristics and sound-groove tracking characteristics.
In addition, the cantilever made of ultra-hard light alloy suppresses harmful deflection and split resonance.
Model Rating
Type | MM Type Stereo Cartridge |
Format | Moving Magnet Type |
Cantilever | Superhard light alloy |
Frequency characteristic | 20 Hz to 20 kHz |
Output voltage | 3.5 mv (50mm/s, horizontal 1 khz) |
Channel separation | 25 dB or More (1 kHz) |
Channel balance | Within 1 dB (1 kHz) |
Distortion factor | 1% or Less (1 kHz) |
DC resistance | 1k Ω |
Impedance | 5k Ω (1 kHz) |
Compliance | Vertical : 10x10-6cm/dyne Horizontal : 10x10-6cm/dyne |
Needle pressure range | 1.0g ~ 1.8g |
Recommended load resistance | 50k Ω ~ 100k Ω |
Replacement Needle Product Number | EPS-51STED |
Needle tip | Diamond Elliptical Needle 0.2x0.7 mil |
Dead weight | 6.5g |